Camera Gimbal Calibration (firmware 2.9 and higher)
Calibration process described below works with Airdog firmware version 2.9 and higher.
We suggest that you check gimbal calibration after you have done a successful Airdog and AirLeash Preflight Check. Here's how to do it:
- Attach your camera to the gimbal (gimbal without camera won't stabilise correctly).
- Turn ON Airdog, wait 10 seconds until the gimbal switches OFF automatically.
- Press the button on AirDog's tail (once) to power ON the gimbal.
- Leave AirDog on the ground (for 1 min) and check the gimbal stays level. If you see it slowly drift or it is simply off the level, then you need to do calibration.